EVIL Gen.1
Legacy Product
3250w RMS Subwoofer
When your sub bass goal is nothing but supreme, unrestrained performance without compromise, the choice is the SSA Evil. The capabilities of the SSA Evil put it in very exclusive company at the zenith of the marketplace. This is where you look first for the ultimate ‘ground pounder’ that will not miss or muddy a note. Crisp and clean across the entire frequency range for those demanding outstanding linear performance thanks to an FEA optimized motor.
Employing a massive triple stack motor, five sandwiched 10” progressive Nomex spiders, an anodized vented Aluminum former, a huge 4-layer 4” flat wound Aluminum coil and a towering ‘Venturi’ solid pole, the SSA Evil has the muscle to handle almost anything you can throw at it.
The SSA Evil is also a top pick for extreme level SPL and bass-boxing competitors alike, while still having the composure for the elite home audio projects. A versatile monster that will meet the most critical low frequency demands while achieving extreme output levels when called upon. Sonic performance so vicious, it had to be deemed Evil.
-
Specifications
12" EVIL D1/D2 15" EVIL D1/D2 18" EVIL D1/D2 Coil(s) 4", 4 layer, flat wind aluminum coils 4", 4 layer, flat wind aluminum coils 4", 4 layer, flat wind aluminum coils Terminals Heavy duty stitched lead or Hybrid stitched FOAD Heavy duty stitched lead or Hybrid stitched FOAD Heavy duty stitched lead or Hybrid stitched FOAD Cone Kraft pulp fiber reinforced cone Kraft pulp fiber reinforced cone Kraft pulp fiber reinforced cone Suspension 5 progressive Nomex™ 10" spiders 5 progressive Nomex™ 10" spiders 5 progressive Nomex™ 10" spiders Motor Triple Stacked, 330 oz., FEA optimized motor Triple Stacked, 330 oz., FEA optimized motor Triple Stacked, 330 oz., FEA optimized motor Former 4" Black anodized alum. former 4" Black anodized alum. former 4" Black anodized alum. former Cooling ‘Venturi’ solid pole ‘Venturi’ solid pole ‘Venturi’ solid pole Lead Wires 144 tinsel count leadwire, sewn in leads 144 tinsel count leadwire, sewn in leads 144 tinsel count leadwire, sewn in leads Hand Crafted in USA USA USA Fs 29.2hz 28.5 Hz 25.9 Hz Re 1.0 Ohms/coil |2.0 Ohms/coil 0.9 Ohms/coil |1.9 Ohms/coil 0.9 Ohms/coil |1.9 Ohms/coil Qms 6.41 | 6.48 6.58 | 6.71 7.37 | 7.60 Qes .46 .53 | .53 .61 | .61 Qts .45 .49 | .49 .56 | .56 Mms 391g | 377g 431g 544g Cms 85.6 | 85.6 .74mm/N | .74mm/N .70mm/N | .70mm/N Sd 480cm^2 810cm^2 | 810cm^2 1210cm^2 | 1210cm^2 Vas 26.8 l 67.7l | 67.7l 144.1l | 144.1l Spl 86.5 | 86.5 88.0 | 88.0 Bl 17.03 24.08 16.1 | 23.3 16.1 | 23.3 Xmax 33 / 33 mm 33 / 33 mm 33 / 33 mm Wattage 3250wRMS 3250wRMS 3250wRMS Displacement 0.18cuft 0.22cuft 0.27cuft -
Enclosure Recommendations
15" EVIL D1/D2 18" EVIL D1/D2 Sealed 2.5 ft^3 4.5 ft^3 Sealed Optimal 4.0 ft^3 6.25 ft^3 Ported 3.25-4.25 ft^3 @ 29-33hz 6.5-7.25 ft^3 @ 29-33hz Ported Optimal 4.25-5.5 ft^3 @ 29-33hz 7.25-8.5 ft^3 @ 29-33hz Sub Outside Diameter 15.625” | 15.625” 18.500” | 18.500” Cut Inside Diameter 14.125” | 14.125” 16.750” | 16.750” Mounting depth 11.250” | 11.250” 11.750” | 11.750”